Posted on 17 February 2012.
The geothermal industry is seeing many water well and truck mounted drills being repurposed for geothermal installations. These larger units can be difficult to maneuver through residential sites and can be costly to transport and maintain. RigKits LLC, however has produced a line of dedicated geothermal drilling rigs. Their rigs are compact, and are powerful [...]
Read the full story
Posted in Articles
Posted on 02 February 2012.
Renewable Solution Provided: reliable, cost-effective heating and hot water solution for off-gas property in remote area. RENOWNED ARTIST SCULPTS ENERGY EFFICIENT FUTURE Artist and sculptor Keith Maddison and his wife Christine live in a 4 bedroom, stone built bungalow, which nestles in the historical and picturesque village of Elsdon in the heart of the Northumberland [...]
Read the full story
Posted in Case Studies
Posted on 31 January 2012.
When it comes to drilling through overburden, nothing buzzes through sand, silt and gravel like a sonic. But, on one recent occasion, the drilling speed surprised even the company who manufacture the sonic drill rig. Drilling a test hole for a future geothermal project, a Sonic Drill Corporation rig was able to bore past 300 [...]
Read the full story
Posted in Articles
Posted on 31 January 2012.
Case Study Project New Building – Sammy Ofer Wing – National Maritime Museum Location London, Greenwich Heat Source ATES (Aquifer Thermo Energy Store) Pipe 6800m of 20×3.4mm W.T.H Tube Manifolds RUW-K with heat exchanger for separate heating & cooling function. Project A £35 million refurbishment and extension at the National Maritime Museum, Greenwich. The project [...]
Read the full story
Posted in Case Studies, Featured
Posted on 11 January 2012.
This short article is an invitation to the ground source heat pump community to engage with brownfield practitioners involved in remediation of soil or groundwater to enhance the ef ciency of both energy exchange and remediation. Brownfield sites have been affected by former uses of the site or surrounding land; are derelict or underused; are [...]
Read the full story
Posted in Articles, Knowledge Centre
Posted on 03 January 2012.
ESI is a leading consultancy for Ground Source Energy, including training and software support solutions. We have a proven track record of successfully delivering comprehensive projects across the UK and Italy. With a technical understanding of the issues faced in both open and closed loop ground source heating and cooling systems. ESI is the ideal [...]
Read the full story
Posted in Case Studies
Posted on 11 November 2011.
With the help of advances in intelligent controls and a shift in design mindset, these systems can steer buildings toward smaller equipment sizes and associated savings. Review three projects and consider the benefits of keeping an upcoming project in the loop. BY STEPHEN HAMSTRA, P.E., ASHRAE HBDP, LEED® AP, CGD For several decades, our industry [...]
Read the full story
Posted in Articles, News
Posted on 26 October 2011.
The issues of sustainability and carbon reduction are key themes of our times. Our duty to reduce carbon emissions, coupled with a challenging economic climate make it difficult for companies to agree to implement new technologies, which in the short term may cost more. Renewable energy and Government grant schemes are a complex area but [...]
Read the full story
Posted in Articles, Geothermal Basics, Renewable Energy
Posted on 19 October 2011.
Uses the moat for heat pump installation More than simply an historic house and garden, Bishop’s Palace is a splendid medieval Palace, which has been the home of the Bishops of Bath and Wells for 800 years. The Palace is surrounded by a stunning moat and it is from here that the renewable energy is [...]
Read the full story
Posted in Articles, Featured
Posted on 18 October 2011.
I hope that by reading this article it will clear up some questions people have on the purchasing of vertical geothermal equipment. We will also look at what other equipment you will need to do vertical geothermal drilling installations. There are three basic types of drill rigs and several brands and variations of drilling rigs [...]
Read the full story
Posted in Articles, Geothermal Drilling Equipments, Geothermal Installation
Posted on 20 September 2011.
Dig down six feet into the earth and you’ll find that the temperature at any latitude in the US is stable within a range of 45-75 degrees Fahrenheit. That relatively constant temperature is the basis for geothermal, or ground source, heat pump systems, which can provide homeowners with a simple, reliable, quiet and low-polluting means [...]
Read the full story
Posted in Articles, Featured
Posted on 30 August 2011.
Thermal conductivity testing (also known as thermal response testing) is a critical step in the commercial geothermal loopfield design process. The goals of the test include measuring the undisturbed ground temperature, calculating the formation thermal conductivity and possibly estimating the thermal diffusivity. While the ground temperature is something that we all understand intuitively, the thermal [...]
Read the full story
Posted in Articles
Posted on 25 July 2011.
One New Change is Land Securities’ latest development located on Cheapside in the heart of the City of London. It is London’s newest shopping destination, complete with cafés and restaurants from renowned chefs and flagship menswear and womenswear fashion brands, all set overlooking London’s most famous landmark, St Paul’s Cathedral. The Building One New Change is a contemporary [...]
Read the full story
Posted in Case Studies
Posted on 11 July 2011.
At Stockholm Arlanda airport, an Aquifer Thermal Energy Storage (ATES) for supply of natural heating and cooling of the airport is under construction. For the seasonal storage of heat and cold a section of an esker is used. With a number of high capacity wells the system can provide the airport with low temperature thermal [...]
Read the full story
Posted in Case Studies