Posted on 26 October 2011.
The issues of sustainability and carbon reduction are key themes of our times. Our duty to reduce carbon emissions, coupled with a challenging economic climate make it difficult for companies to agree to implement new technologies, which in the short term may cost more. Renewable energy and Government grant schemes are a complex area but [...]
Read the full story
Posted in Articles, Geothermal Basics, Renewable Energy
Posted on 17 May 2011.
Britain will take a phased approach to implementing its Renewable Heat Incentive (RHI) scheme, according to details published by the government on 10 March 2011. Payments under the RHI scheme will be made quarterly over a 20 year period to owners of heat installations and will be based on the actual renewable heat output computed [...]
Read the full story
Posted in Renewable Heat Incentive (RHI)
Posted on 28 April 2011.
Geothermal System Design The design procedure is a critical part of the geothermal system, a poorly designed system can have adverse effects of the whole performance. Care during this process is essential, the steps are as follows: 1. Determine the buildings heating and cooling loads The complete design of a buildings heating and cooling system involves several [...]
Read the full story
Posted in Geothermal System Design
Posted on 27 April 2011.
The Interesting Basics… Geothermal units utilize some of the same technology found in your home’s refrigerator. They are both devices that move heat energy. A refrigerator removes heat from food. A geothermal system removes heat energy from the earth to heat your home and removes heat energy from inside your home to cool it. Both [...]
Read the full story
Posted in Technical Information
Posted on 27 April 2011.
Ground source heat pumps (GSHPs) are electrically powered systems that tap the stored energy of the greatest solar collector in existence: the earth. These systems(i.e.Ground source Heat pumps) use the earth’s relatively constant temperature to provide heating, cooling, and hot water for homes and commercial buildings. 1. How Geothermal Energy works The heat pump system [...]
Read the full story
Posted in Geothermal Principle
Posted on 27 April 2011.
Key benefits of Ground Source Heat Pumps: Simultaneously heat & cool different parts of the same building. Very quiet users do not know when the system is operating. Can be set up in multiple zones, with each zone having an individual room control. Greater freedoms in building design due to 50-80% less mechanical room space. [...]
Read the full story
Posted in Benefits of GSHP
Posted on 11 April 2011.
Geothermal heat pumps can be installed in some urban and suburban areas if they utilize dedicated water systems not interconnected with the domestic water or sanitary systems. Several houses, all the apartments in a building or an entire community could be looped into a network of ground water distribution and return, if conditions were right. [...]
Read the full story
Posted in FAQ
Posted on 11 April 2011.
Water-to-air geothermal heat pumps, as the term suggests, can be adapted to water supplies other than wells, such as a freshwater lake or a stream. Another alternative to a well system would be a closed-loop, earth-coupled system. The closed-loop geothermal heat pump system requires only that the heat exchanger be buried in solid contact with the earth. [...]
Read the full story
Posted in FAQ
Posted on 11 April 2011.
Most problems regarding geothermal heat pump dewatering have stemmed from improper determination of well yield. Domestic wells are normally designed to produce enough water for household use only, which is usually 300 to 400 gallons per day. Ground water heating may require 10,000 gallons of water or more per day in extremely cold weather. An adequate water [...]
Read the full story
Posted in FAQ
Posted on 11 April 2011.
A geothermal heat pump does not consume any water in the heat exchange process. If eight gallons of water go in the geothermal heat pump, eight gallons of water will come out. Thus, you will need a method to discharge this water. Typical methods of discharge include returning the water to the aquifer from which it was [...]
Read the full story
Posted in FAQ
Posted on 11 April 2011.
Water use restrictions are more stringent in western states. These states adhere to the prior-appropriation system of water law. When disputes over water use arise, priority is given to parties having senior water rights. Many western states have also specified preferred uses that are given priority over other senior water rights. Eastern states generally follow [...]
Read the full story
Posted in FAQ
Posted on 11 April 2011.
In order for a geothermal heat pump system to operate at its specified heating and cooling capacity and efficiency, the proper ground water flow rate through the water-to-refrigerant heat exchanger must be maintained. The ground water aquifer, source well, and pumping system must be able to supply the required flow rate. The water flow requirement of a geothermal [...]
Read the full story
Posted in FAQ
Posted on 11 April 2011.
The temperature of shallow ground water in the U.S. ranges from 44°F in the north central areas to approximately 80°F in Florida and southern Texas. In North America, geothermal heat pumps can operate efficiently at ground water temperatures as low as 39°F, or even lower, with equipment currently being constructed. Higher temperature ground water will, of course, [...]
Read the full story
Posted in FAQ
Posted on 11 April 2011.
Ground water is attractive as a heat exchange medium in residential and commercial space conditioning. By using a geothermal heat pump, ground water can serve as a heat source (for heating) and a heat sink (for cooling). The temperature of the ground water is nearly the same year-round, regardless of the temperature extremes on the [...]
Read the full story
Posted in FAQ